16pc Watch Repair Tool Kit

Product ID: 102589

No more expensive watch repairs from the local jewellers. Fix it yourself with this 16 piece tool kit for watches.

Usage:

* Open the table key: open the bottom cover and tighten the screws bud directly aligned with the tool in front of the bottom cover the gap of two feet turn right direction switch.

* Open base knife: press the bottom of the watch for the bottom cover must be one of the tools used, pry the end of knife.

* Split strap device: If your watch is new, then removed when the strap is the most convenient to use.

* Ear Health grant: dedicated to dismantling strap watch cases and students between the ears, or belt of Health ears the most methods.

* Red Clamp: assembly and disassembly is inevitable to use the pliers watches, such as the demolition of strap in the starting folder to folder, pins, etc.

* Folding plastic seat strap: demolition watch chain, will watch chain sandwiched plastic seat racks. Very easy to load or open the strap.

* Screwdriver: for internal assembly and disassembly machines use.

* Rubber hammer: split strap installed after the hairpin, etc. when used for tapping.

* King fell: If your watch band is too tight or too just bought a strip, you must bring it fell smaller.

* Sharp tweezers: Some folders and other small accessories and spare parts, etc.

SPECIFICATIONS:

* Size: approx.27 cm x 20 cm x 2.8 cm

* Fits for standard size watch (back cover groove diameter within 34mm ).

PACKAGE CONTENTS:

1 x Metal and plastic watch hammer
1 x Metal strap holder block
1 x Watchband link pin remover
1 x Mini long nose pliers
3 x Pin punches
1 x Tweezers
1 x Watch case opener
2 x Mini phillips screwdrivers
3 x Precision slotted screw drivers
1 x Watch case knife
1 x Pin pusher